Part 2 of the Chris Neal’s photographs of the 2008 Large Model Air Show at RAF Cosford.

Seen here are a super-large scale microjet C17 Globemaster III, a Wellington, a replica of Vulcan XH558, a Vickers Wellington, a Fiat CR32, a T6 texan and a Mustang. There is also the flying display of a Spitfire IX and a Douglas CH47 Dakota.

Part 1 available here.

The Large Model Association’s annual air show took place on the 19th-20th of July this year and saw an impressive collection of large radio-control model aircraft - some of which, despite the inclement weather flew before the crowds.

These pictures are kindly provided by Chris Neal.

Parts 2 can be found here

As much for the benefit of my own memory as for yours, I briefly detail here the drum counter reset procedure for the Brother HL 5030 laser printer (and probably most of the HL 5xxx range).

The HL 5030 has an internal counter which basically registers pages printed (apparently with weighting for cold and hot starts). This counter can be reset when replacing a drum or if you just want to run your existing drum into the ground (the HL 5030 is an older model now).

Counter Reset Procedure.

1. Power on (Drum light should be flashing).
2. Open the toner cartridge access door (big door on the front).
3. Remove the toner cartridge by pulling on it.
4. Reinsert the toner cartridge (give it a good shove).
5. Press and hold the ‘GO’ button for about four seconds. The led indicators should come on one-by-one in amber. Once they are all on, release the ‘GO’ button.
6. Close the toner cartridge access door.

The reset procedure is now complete.